VELCRO VEK90082C Sticky Tape

$31.87

VELCRO 90082 General Purpose Sticky Back

119 in stock

Description

VELCRO 90082 General Purpose Sticky Back – 15 ft (4.6 m) Length x 0.75″ (19.1 mm) Width – 1 / Roll – White: Sticky Back Tape, the original hook-and-loop fastener, features simple peel-and-stick application. It is perfect for office, school, home and workshop use. Use on smooth surfaces including walls, glass, tile, plastic, metal and wood. Tape works with other VELCRO Brand fasteners or adheres to itself. :

General Information


Manufacturer:Velcro Companies
Manufacturer Part Number:90082
Manufacturer Website Address:http://www.velcro.com
Brand Name:VELCRO
Product Line:Sticky Back
Product Name:90082 General Purpose Sticky Back
Marketing Information:

Sticky Back Tape, the original hook-and-loop fastener, features simple peel-and-stick application. It is perfect for office, school, home and workshop use. Use on smooth surfaces including walls, glass, tile, plastic, metal and wood. Tape works with other VELCRO Brand fasteners or adheres to itself.

Packaged Quantity:1 / Roll
Product Type:Sticky Tape

Product Information


Tape Width:0.75″ (19.1 mm)
Tape Length:15 ft (4.6 m)
Application/Usage:

  • Mount Picture/Poster
  • Multi Surface

Physical Characteristics


Product Color:White

Miscellaneous


Additional Information:

Shape:

Roll

Care and Application:

Instructions:

  • Clean and dry surface before application.
  • Peel tape from fastener and press firmly into place.
  • Adhesive reaches maximum strength after 24 hours.

Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.

Removal Instructions:

  • Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
  • Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
  • Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
  • Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
  • Stick the ball on the adhesive which is on your substrate and pull it off
  • Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
  • If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners

Weight Rating:

1 lbs per square inch up to 5 lbs

Functional Temperature Range:

0-100° F (-18-38° C)

Recycled:No
Assembly Required:No
Country of Origin:United States

Additional information

Weight 1 kg
brands

VELCRO